Fat Azz Ceramic Black Pipe for Ski-Doo 850 E-TEC Turbo (REV Gen4 & Gen5) // SKU: 01-215-C

$749.95 USD

⚙️ REQUIRED ELEVATION SELECTION (PIPE STINGER): Please select your primary operating altitude (Low Elevation or High Elevation) from the options above so we include the properly calibrated Fast Reaction Turbo Pipe Stinger for your riding conditions.

🔥 HIGH-TEMP BLACK CERAMIC FINISH: Finished exclusively in our Satin Black Ceramic Coating for a superior thermal barrier—locking exhaust gas energy inside the pipe to spool the turbo faster while lowering under-hood radiant temperatures.

SKU: 01-215-C

Finish: High-Temp Satin Black Ceramic Coating

Included Stinger: Elevation-Specific Fast Reaction Turbo Pipe Stinger (Select Low or High Elevation above)

Horsepower Gain: +10–12+ Peak HP (Up to +15 HP in optimal conditions) / +150–200 Peak RPM

Fuel & Tuning Requirement: 91-Octane Pump Gas (No ECU tune required for bolt-on operation)

Primary Application: 2020.5+ Ski-Doo REV Gen4 & Gen5 850 E-TEC Turbo & Turbo R snowmobiles (Summit, Freeride, MXZ X-RS Competition).

Unleash the most powerful bolt-on exhaust upgrade on the market for your Ski-Doo 850 E-TEC Turbo and Turbo R with the Bikeman Performance Fat Azz Ceramic Black Expansion Pipe. Engineered through extensive dyno and real-world mountain/trail testing, this high-volume expansion chamber delivers a massive 10 to 15 horsepower increase, a 150 to 200 RPM gain, and hard-hitting mid-to-top-end pull without requiring any fuel controller or ECU modification.

Stock turbo expansion chambers restrict high-RPM exhaust flow, causing the engine to hit an aerodynamic wall at top speed. By optimizing cone volume, taper angles, and pairing the chamber with your elevation-matched Fast Reaction Turbo Pipe Stinger, the Fat Azz pipe eliminates backpressure bottlenecks and keeps your 850 Turbo pulling hard through the top of the powerband. For MXZ Turbo R Competition riders, simply bolting this pipe onto a bone-stock sled delivers an immediate 2 to 3 sled-length advantage in 600 feet—with even larger gains available when paired with Bikeman Stage 2 clutching and Torque Link ECU tuning.


Key Performance Features

  • +10 to 15 Bolt-On Horsepower: Massive mid-range and peak power gains across the entire RPM band—pulls cleanly past the factory high-speed RPM wall.
  • +150 to 200 RPM Increase: Frees up exhaust flow to build higher peak RPM; pairs seamlessly with Bikeman adjustable clutch weights to put every extra horsepower to the track.
  • Elevation-Calibrated Fast Reaction Turbo Pipe Stinger (Select Above): Select either Low Elevation (0–6,000 ft) or High Elevation (6,000+ ft) to precisely match expansion chamber backpressure to your riding altitude—maximizing off-idle throttle response, turbocharger spool-up, and peak RPM consistency.
  • No ECU Flash Required (Bolt-On & Go): Safe to run right out of the box on factory stock calibration using 91-octane premium pump gas.
  • Torque Link Tuning Compatible: Unlocks even greater horsepower and boost potential when combined with Bikeman custom ECU flashes via Torque Link.
  • Direct OEM & BMP Muffler Fitment: Drops directly into your factory OEM turbo muffler or any Bikeman Performance Stainless Steel Turbo muffler using stock mounting locations.

Purpose-Built Black Ceramic Thermal Barrier

Turbocharged 2-stroke engines generate extreme Exhaust Gas Temperatures (EGTs) under sustained boost. Our dedicated Black Ceramic coating is purpose-built for high-heat turbo applications:

  • Maximum Thermal Barrier: Reflects and retains heat inside the expansion chamber where it belongs—keeping exhaust gas velocity high to drive the turbine wheel harder.
  • Lower Under-Hood Temperatures: Dramatically reduces radiant heat soak into surrounding intake plastics, wiring harnesses, and clutches.
  • Extreme High-EGT Durability: Matte/satin performance finish engineered to withstand severe turbocharger heat cycles without degrading.

Vehicle Fitment & Compatibility

  • Compatible Sled Models: Fits all 2020.5+ Ski-Doo REV Gen4 and REV Gen5 850 E-TEC Turbo and 850 E-TEC Turbo R snowmobiles:
    • Ski-Doo Summit 850 Turbo / Turbo R (Expert, Edge, X)
    • Ski-Doo Freeride 850 Turbo / Turbo R
    • Ski-Doo MXZ X-RS 850 Turbo R Competition Package
    • Ski-Doo Renegade / Backcountry 850 Turbo models
  • CHASSIS EXCLUSION NOTE: DOES NOT FIT Hill Climb Racer (RMSHA / HCR) chassis configurations.