Stage 2 SNYPR Clutch Kit for Ski-Doo 850 Rev-Renegade (2017+) // SKU: 06-25-207
SKU: 06-25-207
Primary Application: 2017+ Ski-Doo Renegade 850 E-TEC models (Adrenaline, Enduro, X, X-RS, and Backcountry) operating at low elevation (0–6,000 ft) equipped with pDrive primary and QRS secondary clutches.
Unlock explosive acceleration, hold peak horsepower RPM, and eliminate drive belt slip with the Bikeman Performance Stage 2 SNYPR Clutch Kit for 2017+ Ski-Doo 850 Renegade snowmobiles. The factory pDrive and QRS clutching setups are calibrated with broad mass-market compromises, often upshifting prematurely, fading RPM on long pulls, and generating excess belt heat. This Stage 2 package optimizes force curves across both clutches to ensure your 850 E-TEC stays locked squarely in its peak powerband.
Whether you are pounding high-speed trail systems, ditch-banging, or carving off-trail powder at low elevation, this kit delivers neck-snapping corner-to-corner acceleration and lightning-fast backshifting. At the heart of the system are our Hyper-Adjustable SNYPR Primary Weights (65–102g) paired with our custom-machined XP1 QRS multi-angle helix, matched primary/secondary springs, and secondary Teflon anti-binding washers.
Key Performance Features
- Holds Consistent Peak RPM: Maintains target engine RPM through full-throttle pulls without the high-RPM fade common to factory setups.
- Lightning-Quick Corner & Powder Backshift: Instantly drops into the ideal drive ratio when chopping the throttle and reapplying power, delivering instant response out of corners or technical maneuvers.
- Hyper-Adjustable SNYPR Weight System (65–102g): Massive 37-gram tuning window allows effortless mass changes using threaded set screws and tungsten slugs to adapt to stock setups, pipe upgrades, or future modifications.
- Custom-Cut XP1 QRS Secondary Helix: Progressive multi-angle ramp profile engineered specifically for 850 low-elevation crossover and trail resistance profiles.
- Eliminates Secondary Spring Bind: Dual Smooth Shift Teflon washers isolate secondary spring rotation, lowering friction for buttery-smooth upshifts and consistent shift cycling.
- Substantially Lower Belt Temperatures: Maintains superior secondary belt clamp to eliminate belt slippage under heavy load, extending drive belt service life.
Kit Components Included
- Hyper-Adjustable SNYPR Primary Clutch Weight Set (SKU: 05-HAW-65102): Features an adjustable mass profile from 65 to 102 grams; includes threaded adjustment set screws and high-density tungsten slugs.
- Primary Drive Clutch Spring (173-385 Rate) (SKU: 05-173-385): Precision-rate spring featuring a black finish with purple stripe identification for consistent, repeatable shift cycles.
- Secondary Driven Clutch Spring (205-310 Rate) (SKU: 20-205-310): Provides firm sheave side-pressure to prevent belt slip and ensure aggressive backshifting.
- Custom BMP XP1 QRS Secondary Helix: High-grade progressive multi-angle helix engineered specifically for low-elevation 850 Renegade applications.
- Smooth Shift Secondary Teflon Washers (2-Pack) (SKU: 05-TW-201-2): Low-friction washers that isolate torsional spring bind in Ski-Doo QRS driven clutches.
- Comprehensive Clutch Setup Guide: Baseline setup sheets for stock, modified, and varying track configurations.
- SNYPR Weight Tuning & Adjustment Guide: Detailed instructions on setting base mass and placing tungsten slugs.
Vehicle Fitment & Elevation Specifications
- SKU: 06-25-207
- Chassis Compatibility: Ski-Doo REV Gen4 & Gen5 platforms (2017+).
-
Compatible Sled Models:
- Ski-Doo Renegade Adrenaline 850 E-TEC (2017+)
- Ski-Doo Renegade Enduro 850 E-TEC (2019+)
- Ski-Doo Renegade X 850 E-TEC (2017+)
- Ski-Doo Renegade X-RS 850 E-TEC (2018+)
- Ski-Doo Renegade Backcountry / Backcountry X 850 E-TEC (2017–2018)
- Elevation Specification: Calibrated specifically for Low Elevation (0 to 6,000 ft) riding.
- Clutch System: Fits factory Ski-Doo pDrive primary clutches and QRS secondary driven clutches.
- Tuning Note: Baseline weighting recommendations are outlined in the included setup sheet. Additional micro-adjustments can easily be made using the pDrive clickers or by adding set screws and tungsten slugs to match your exact track lug depth and rider weight.
